The Standard Tree Removal Process

There are several reasons why a tree would need to be cut down. From manufacturing to disease, trees need to removed, sometimes. When this happens, professional tree removal technicians use a particular process to safely remove trees without harming the surrounding environment or another person. Continue reading to learn about this standard tree removal process, and possibly become an expert yourself!

First Steps to Tree Removal

The first task to check of the tree removal to-do list is to conduct an initial inspection. This involves inspecting the entire surrounding environment, as well as, the tree itself. The tree care technician is basically looking for any obstacles that may interfere with the removal process, or possible structures nearby that can become damaged by a fallen tree. They also look for signs of tree diseases, deterioration, and corrosion. This can help them determine the degree of difficulty and hazard associated with the tree removal job.

During this same step, the technician will also observe the lean of the tree. The direction that a tree naturally leans is most likely the same direction it will fall to the ground when cut down. They will put together multiple alternatives for emergencies, unexpected falls, or if the tree falls the other way. It is extremely advantageous to pre-plan escape routes such as these when taking down large trees.

Cutting the Tree Down

The size of the tree will generally determine the type of tools and equipment needed for the job. For larger trees, heavy duty chainsaws and electrical tree cutters are popular and effective choices; while for smaller trees, a basic hand saw works just fine. Once this is figured out, the technician can begin to make the initial cuts. What happens is, a tree tech will apply two small cuts into certain sections of the tree trunk to force the tree to fall in a particular direction. An undercut is a 90 degree V-shaped cut that is administered to the side of the tree that should lead the fall. At times, a technician will choose to do something called a back cut that helps relieve tension that may be preventing a fall. This is applied to the back side of the tree, opposite of the undercut.

Stump Removal

In many tree removal jobs, large branches are cut out first, then the tree is taken down, and you are left with a tree stump. At this point a property owner or technician has a few options. The first option is to dig the stump up from the ground. This can be very time consuming and hard labor but is the most effective strategy for stubborn roots. Helpful tools to use for stump removal include sharp spades, pruning saws, or pricks. Another option is that requires less labor is to use chemicals to speed up decomposition. Holes are drilling into the tops and the chemicals are poured in. It is as simple as that. This is an easy option, but not an overnight solution. The decomposition takes some time.

Noblesville Tree Service

Noblesville Tree Service

Noblesville Tree Service 317-537-9770

Call 317-537-9770 for professional tree removal services in Noblesville, Indiana. We are highly trained and qualified arborists with decades of experience in the tree care industry. Our teams retain the latest technologies and state-of-the-art equipment to facilitate safe, fast, and effective tree services for both residential and commercial properties. We are happy to provide free estimates, tree care advice, and general tree information any time! Just call 317-537-9770 and speak with a friendly
and knowledgeable professional about tree
removal and service
in Noblesville, IN.

Tree Removal Tips for Small Trees

If you have a small tree in your yard that you wish to remove, you can accomplish this task all on your own if you are well-prepared and properly equipped. It’s not a complex or complicated project, but it is generally very time-consuming and requires some good old-fashioned manual labor. Continue reading to learn the easiest and most reliable way to remove a small tree, as well as, who to call for professional tree removal services in your neighborhood.

Removing Small Trees

Again, removing small trees is not a difficult or challenging job, but it is a demanding one. You can certainly expect to spend most of your time and effort digging up all the tree roots. Choose a day when the temperature is not too high and drink plenty of water, so to prevent heat-related illnesses like dehydration. You might have an easier time choosing a day that follows a few rainy days. This way, the ground is softer and easier to penetrate. Your back will be thanking you for this later! Also, be sure to gather all the necessary tools and equipment needed to make the job possible, as well as, a bit easier. This includes a sharp spade, large metal shovel, gloves, plastic tarp (or burlap), protective eye goggles, tree twine, hose and water hookup (in case the ground is too dry and solid), and a hand saw. Not all of these item are mandatory, but they do make the digging and handling process easier.

Here’s How to Remove a Small Tree:

1. If there have been no rainy days, wet the ground using a hose to soften the soil. Do this one day in advance, as well as, the same day of the project.

2. Assess the diameter of the tree’s root ball in order to dig a wide enough circumference around the tree for easier removal. Do this by measuring the diameter of the tree trunk, and then multiplying that number by a number between 9 and 12, depending on the age of the tree. Use a higher number for older trees. So if the trunk was 3 inches in diameter, dig a circumference that is at least 27 to 36 inches wide. For an idea of proper depth, multiply the tree trunk diameter by 6. In this case, you would need to dig 18 inches into the ground to be able to pull out the tree and root ball.

3. Use tree twine to tie up and hold back the lower sections of branches so they are not in your way when you are digging up tree.

4. Use the spade to cut into the ground along the circumference you measured earlier. Simply place the sharp thin side of the blade directly on top of the soil, then use your foot and body weight to press it into the ground. You don’t have to remove any soil yet, you just need to create the divisions in the soil.

5. Use either the spade or shovel and dig out the excess soil to expose the root ball. And then remove all the excess soil surrounding the root ball to expose the tree roots.

6. Using the spade again, push the blade securely into the ground beneath the root ball, push in with your foot, tilt the shovel, and lift the root ball from the soil. This will almost look like a teeter-totter motion.

7. Now use the spade to cut through small tree roots, and a handsaw for larger roots.

8. Remove the tree from the hole and place onto the tarp or burlap, and drag it to an appropriate disposal site!

Tree Service Noblesville Indiana

Noblesville Tree Service

Noblesville Tree Service 317-537-9770

Call 317-537-9770 for professional tree service in Noblesville, Indiana you can trust. We are highly trained and qualified tree service contractors with decades of experience in the industry. We offer a wide range of tree services for both residential and commercial properties. If you need tree removal, whether for a small tree, large tree, or plot of trees, we are the professionals that can get the job done at a price that pleases! Call 317-537-9770 for expert tree removal services in Noblesville, IN and its surrounding areas.