The Standard Tree Removal Process

There are several reasons why a tree would need to be cut down. From manufacturing to disease, trees need to removed, sometimes. When this happens, professional tree removal technicians use a particular process to safely remove trees without harming the surrounding environment or another person. Continue reading to learn about this standard tree removal process, and possibly become an expert yourself!

First Steps to Tree Removal

The first task to check of the tree removal to-do list is to conduct an initial inspection. This involves inspecting the entire surrounding environment, as well as, the tree itself. The tree care technician is basically looking for any obstacles that may interfere with the removal process, or possible structures nearby that can become damaged by a fallen tree. They also look for signs of tree diseases, deterioration, and corrosion. This can help them determine the degree of difficulty and hazard associated with the tree removal job.

During this same step, the technician will also observe the lean of the tree. The direction that a tree naturally leans is most likely the same direction it will fall to the ground when cut down. They will put together multiple alternatives for emergencies, unexpected falls, or if the tree falls the other way. It is extremely advantageous to pre-plan escape routes such as these when taking down large trees.

Cutting the Tree Down

The size of the tree will generally determine the type of tools and equipment needed for the job. For larger trees, heavy duty chainsaws and electrical tree cutters are popular and effective choices; while for smaller trees, a basic hand saw works just fine. Once this is figured out, the technician can begin to make the initial cuts. What happens is, a tree tech will apply two small cuts into certain sections of the tree trunk to force the tree to fall in a particular direction. An undercut is a 90 degree V-shaped cut that is administered to the side of the tree that should lead the fall. At times, a technician will choose to do something called a back cut that helps relieve tension that may be preventing a fall. This is applied to the back side of the tree, opposite of the undercut.

Stump Removal

In many tree removal jobs, large branches are cut out first, then the tree is taken down, and you are left with a tree stump. At this point a property owner or technician has a few options. The first option is to dig the stump up from the ground. This can be very time consuming and hard labor but is the most effective strategy for stubborn roots. Helpful tools to use for stump removal include sharp spades, pruning saws, or pricks. Another option is that requires less labor is to use chemicals to speed up decomposition. Holes are drilling into the tops and the chemicals are poured in. It is as simple as that. This is an easy option, but not an overnight solution. The decomposition takes some time.

Noblesville Tree Service

Noblesville Tree Service

Noblesville Tree Service 317-537-9770

Call 317-537-9770 for professional tree removal services in Noblesville, Indiana. We are highly trained and qualified arborists with decades of experience in the tree care industry. Our teams retain the latest technologies and state-of-the-art equipment to facilitate safe, fast, and effective tree services for both residential and commercial properties. We are happy to provide free estimates, tree care advice, and general tree information any time! Just call 317-537-9770 and speak with a friendly
and knowledgeable professional about tree
removal and service
in Noblesville, IN.